Doors

I've cut out the doors and the openings for the windows.  This shot shows the fiberglass in place on the outside of the doors.

The inside of the door with the framing and 3/4" insulation in place.  The thin panel of plywood in the background will be glued over this surface.

This is the aluminum "Tee" molding that will go around the outer perimeter of the doors.  You can't bend it like this without first annealing it.  I had a local welder anneal it with a torch and it bent beautifully around my plywood mold, with only a minimum of tapping with a plastic mallet.